• LCD support: Up to 1920x1200, 8-Bit
• Panel connectivity: LVDS
• Inputs: Displayport
• Programmable hot-keys
• RS-232 control
• Part number: 4174900XX-3
The DD-1920-DP LCD controller is a compact Displayport input general purpose solution for LCD panels up to 1920x1200 resolution. One of the key features of this highly reliable controller is the low signal latency from input signal to panel output signal.
|Panel Connectivity||Panel connection:LVDS (2 channel)
Panel resolutions:Up to 1920x1200, includes all standard resolutions as well as custom resolutions
Colors:Up to 8-bit per color
Controller power:+12V/+24VDC ±5%, 4W
Panel power:3.3V, 5V, 12V, 18V
Backlight inverter/driver support: PWM, DPMS Enable pin (5V or 3.3V)
|Input: Displayport (x1)||60Hz up to 1920x1200
75Hz up to 1280x1024
|Function Interface||On Screen Display (OSD) menu
Functions can be called by buttons or IR remote control.
Functions are also accessible via a Serial port (RS-232)
|Functions||Basic: Brightness, Contrast, Sharpness, Clock, Phase, Color temperature, Image position, Gamma
Other: Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position, OSD menu rotation, OSD transparency, Select input source, Volume control, Load factory defaults
|Other||Status indicators on board: Dual color or LED
Plug & Play: DDC 1.2/b compatible
|Reliability||MTBF in excess of 100,000 hours @ 25oC (calculated using Telcordia SR-332 procedure)
Warranty 3 years
|Volatility||1 pc MCU in STDP6038 on U7 20Kbyte volatile memory for SRAM for OSD storage.
1 pc Flash memory on U10 4Mbits non-volatile memory for system program.
1 pc EEPROM on U5 16Kbits non-volatile memory for system setting storage.
3 pcs EEPROM on U12, U13, U20 2Kbits non-volatile memory for VGA, DVI & Displayport EDID storage.
For a full selection of LCD Controller accessories click here.